Outdoor Car Cover Fabric Guide

No matter whether your need a car, , funeral hearse, antique and classic
car , truck, SUV, van, limousine cover. All car cover fabrics are made to
be used either indoor or outdoor . Here is a list of the different outdoor
cover fabrics are specifically made to be used in a particular climate.
Outdoor climate with determine what cover fabric you choose. Think
about the environmental factors when choosing the best fabric. When
buying a custom outdoor cover consider your climate: hot, humid, sunny,
rainy, snowy, sub zero, sleet, hail, etc...
 
Evolution 4

This fabric uses 4-layer polypropylene construction for maximum protection
 in all weather conditions.

• Naturally Moisture Resistant
  Acid rain, industrial pollutants, tree sap and bird droppings will not
  harm the fabric
• Dries Quickly
  Moisture is not absorbed by the fabric fibers.
• Breathable
  Allows air to circulate through the fabric.

Dust / Pollution Barrier
The two middle layers of E4 fabric act as a filtration barrier against most
airborne pollutants as small as 0.1 microns (smaller than fine talc).
Impact Absorption
4-layer thickness absorbs impacts better than any other vehicle cover fabric
to help protect the finish from nicks, dings, dents, and scratches. Available in
blue, gray, tan

Noah
This fabric actually stops water, yet it "breathes" to allow any trapped moisture,
seam seepage or condensation to easily evaporate.  The unique construction
process results in a cover with maximum all-weather protection... highly water
resistant, dust resistant, UV resistant and breathable to make sure moisture
and/or heat don't stay under the cover.  Made in the USA, the fabric weights
only 4.45 oz./sq. yd., so it's easy to handle and fold!

• Protective Outer Layer
  A bi-component spunbond, using sheath core technology. The inner
  core is polypropylene for strength, with a polyethylene wrap for softness. 
  A silver-gray color was selected because of its heat-resistant properties. 
  The fabric is also treated with UV inhibitors for extended outdoor use.
• Micro-Porous Middle Layer
  The barrier layer is breathable film, a proprietary stretch-film technology
  developed exclusively for Kimberly-Clark.  The film is stretched and
  subjected to a chemical process that creates microscopic holes smaller
  than droplets of water or dust, yet large enough to allow moisture vapor
  to escape.
• Soft, Paint-Protecting Inner Layer
  A bi-component fabric made with polyethylene and nylon. This combination
  results in an exceptionally high strength-to-weight ratio, with the "soft touch" necessary for today's water-based paint finishes.

Available in Soft Gray.

Multibond

Uses 3-layer polypropylene construction for moisture and dust resistance, and the
fibers are treated for extra UV resistance.  This U.S. made fabric offers good, basic protection and is an excellent value.

 

• Lightweight
  Easy to use, and less bulky for compact storage.
• Soft & Non-Abrasive
  Will not scratch paint.
• Breathable
  Allows moisture and condensation to evaporate.
• Moisture, Mold & UV Resistant
  Polypropylene fibers are naturally moisture resistant and treated for extra
  UV protection
• Good Dust Protection
  When used indoors, keeps vehicle cleaner than most woven fabrics
• Soft & Non-Abrasive

Available in Gray

Weather Shield

Uses the patented Nextec® encapsulation process, originally developed for
high-performance outdoor sports-wear. Their proprietary technology uses
precision and controlled placement of special polymers to make ordinary
fabrics extraordinary! The encapsulation process places an ultra-thin film
around the fabric fibers and precisely places a durable, breathable barrier
within the woven polyester fabric to complete the high-performance process.

Unlike traditional coatings and laminations that just protect one side of the
fabric, Nextec uses up to 40 computerized process controls to place
protective polymers inside the fabric, to shed water, and stop dust, bird
droppings, tree sap and industrial pollutants from reaching your vehicle's finish.
The result is a fabric that provides maximum protection, but isn't bulky and
hard to store. Using Nextec encapsulation technology the ultimate car cover..
because no other fabric has every shielded your car or truck from the elements
like this one!

• Sheds Water
  Encapsulation process assures fabric sheds water as soon as it hits
  the cover.

• Superior Dry Time
  Because the fabric sheds moisture it has an absorption factor of only
  20%, compared with up to 40% for standard woven and non-woven
  fabrics. That means, if the cover has been sitting out in the rain you
  only need to shake it and the residue moisture will easily dry, in the
  trunk or on the car.
• Breathable
  Allows any heat or condensation under the cover to easily escape.
• UV Resistant
  Special additives prevent UV degradation and protect the vehicles finish
  and interior.
• Dust-proof
  Patented fiber encapsulation process prevents dust from filtering through
  the fabric.
• Polymers provide a silky smooth finish to the fabric and provide superior
  paint protection. Nextec fabric has been tested at 1,000 cycles on
  abrasion wheels without scratching (surface must be clean and waxed).
• Durable
  The encapsulation process is not affected by heat or cold and the
  process won't degrade over the life of the fabric.
• Easy Care
  Unlike non-woven fabrics you can clean most car-size covers in your
  HOME washer and dryer.

• Packs Small & Light
  All this protection in a lightweight package that packs into 1/4 to
  1/2 the volume of multi-layer, non-woven fabrics.